Replaced thermal fuse tested unit opt test good.; used 1 SHIPPING (SHIPPING LOGISTICS*) from stock

Cc that unit is making a noise when agitating. Ran test in diagnostics for agitation and sounded perfect. So I looked underneath and removed rotor and everything looked perfect. So I started a cycle with some clothes to see what it would do and it the sound he is hearing is just the slider and rotor which have a small play on them and make a sound when there going back and forth but unit is working as designed.

"Cc that unit stopped cooling but it started working again fine and it only happened once. Verified temp in freezer and it was at 6* and ff section at 36*. Removed evap cover and had good frost pattern. Explained to customer it couldve been a glitch in control board but as of now unit is working fine. I would be guessing on what it might need but if unit kept cooling and than stopped cooling again he will need main board replaced. Left estimate just incase.; ordrng 1 W10818296 (Control board), used 1 SHIPPING (SHIPPING LOGISTICS*) from stock"

Cc that theres ice buildup at the bottom of evaporator. Confirmed drain tube is clogged up. Steamed out ice and made sure the tube on back of unit was installed properly and it wasnt so I installed it properly opt test good.

"Cc that unit is not turning on. Verified by pulling unit out and found thermal fuse is open will need fuse replaced. Ordering part.; ordrng 1 WPW10545291 (Fuse), used 1 SHIPPING (SHIPPING LOGISTICS*) from stock"