"Cc fault code E26, unit not responding Set unit into diagnostics test mode. E26 code pertains to lid switch fault per techsheet. Ran P3 test, all functions passed. Ran manual test P4-0 lid lock test, lid locked several times, then stopped responding(unlocking). Unit will need lid latch assembly replaced. Replaced latch using miscellaneous truck stock part. Ran P3 test cycle again, all functions passed. Cleared fault codes in history. Set unit back into service mode. Op test good. ; used 1 WPW10482836 (Latch) from stock"

CC that the light does not stay up. Confirmed. Found the socket broken. Will need a new socket. Cust does not want to repair. ; ordrng 1 WB18X27245 (Socket)

"CC that there is a noise in the spin cycle. Confirmed. Found the belt slipping on the cam. Looked underneath found oil leaking. Will need a new Gearcase, cam, belt, shifter and capacitor. Cust does not want to repair ; ordrng 1 W11132267 (Gearcase) and 1 W10804664 (Capacitor) and 1 W10721967 (Cam) and 1 WPW10006384 (Belt) and 1 WPW10006355 (Shifter) and 1 WPW10215115 (Washplate), used 1 SHIPPING (SHIPPING LOGISTICS*) from stock"

Cc oven not igniting Replaced main control and ignitor using customer supplied pre id parts. Ran oven heat test to 350 degrees. Oven ignited and preheated properly. Op test good.

"Cc start/power buttons are hard to push, doesnt always workCustomer instruct on how to properly power unit on and start cycle per service pointer W11679421. Unit is working as designed. Op test good."