"Cc unit not getting up to temp. Checked temp sensor, room temp 1087, in range. Ran unit at 350. Once it got to temp, ignitor turned off and never came back on, gave it 8 minutes even with opening and shutting door. Ignitor did not spark back on. Will need ignitor and harness. Gave estimate; ordrng 1 WPW10324262 (Bake ignitor) and 1 W11161843 (Harness)"

"Cc saw smoke. Went over all oven elements, control, burners. No signs of smoke or burning. All components test good. Op Test Ok."

"CC bought off Facebook marketplace, only set up for 1 month and problems. Cc unit will not do anything, throwing codes and door locked. F1E2 MCU error, F5E2 door lock error F6E1 Communication error, F8E1 no water detected. Unlocked door, cleared codes. Tried a diagnostics, will not bring in water past test C02, then stops and throws F6E2 communication error. Gave estimate for controls, valve and switch. Customer paid svc, do not order parts. ; ordrng 1 WPW10374126 (MCU) and 1 W10427972 (Main Control) and 1 WPW10304342 (Pressure switch) and 1 WPW10289387 (Valves), used 1 SHIPPING (SHIPPING LOGISTICS*) from stock"

"When first arrived, took temps. Temp reads 40 in FF and 0 in FZ, ice bin full of ice. Temp is good. Replaced main control kit in back. Tested. All components working. Good. Op Test Ok.; used 1 SHIPPING (SHIPPING LOGISTICS*), and 1 SENIORDISCOUNT (senior discount) from stock"

"Cc another company came in for diagnosis and told them they needed a new evap. No pressure test has been done. Talk to customer and they said unit still gets cold, makes ice normally. Doesnt sound like a sealed system or defrost issue. updated control. Ordering control kit. ; ordrng 1 W10823804 (Control kit), used 1 SHIPPING (SHIPPING LOGISTICS*) from stock"