DRYER MAYTAG MEDX655DW1 "Customer complaint that of burn marks on heat inlet grate inside drum, inspected unit inside, no evidence of fire, started normal dry cycle, unit is heating normally, unit is operating as designed, customer has plastic style vent tube connected to dry

DBL WALL OVEN KENMORE 790.4200361 I installed the new part unit did not test good this means that a part that was sent is bad from the factory need new controls. When I had the oven uninstalled from the wall and disassembled I individually tested the heating elements the fuses everything

DBL WALL OVEN KENMORE 790.4200361 "I install the new part unit did not test good but the main control board does have visual issues I can hear the control board for the fans in the rear cutting in and out customer wants to continue with the repair to replace the board in the back; ordrng

DRYER WHIRLPOOL WED75HEFW1 The pulley failed. Installed the new part op tested good. ; used 1 4392067 (DRYER REPAIR KIT) from stock

DBL WALL OVEN KENMORE 790.4200361 I originally thought the unit was not working due to improper calibration. I recalibrated the oven did not work I called Frigidaire tech line. He had me re-calibrate the oven still did not work the main control board is supplying DC power too the relay b