WASHER WHIRLPOOL WFW8300SW0 Installed latch is now locking but still faulting out to f22 Spoke to BJ unit will need control board Will need 2 techs if customer wants to repair Built est for control and install Customer will call with decision if he wants to continue or get refund

WASHER WHIRLPOOL WFW8300SW0 "Cc unit gave error Found error of f22 door lock failure Tried to get unit to unlock in diagnostics but will not Manually unlocked door to remove clots Ran test cycle unit failed and door lock just clicking Needs door lock ; ordrng 1 WPW10253483 (latch124

Found no response from ui, control receiving 120vac, reset connections, ng, disconnected each load, ng , needs ui and control; ordrng 1 W11135391 (COMSOLE) and 1 W11162440 (CONTROL), schdld next appmnt for 7/1 Wed

Complaint that the unit will not power on. Checked and found 120vac at the outlet. Found the green status light flashing on the main control indicating 5vdc present. Customer stated they were seeing a F6 error before unit shut down indicating a communication error. Unit needs both UI and main control.; ordrng 1 W10812420 (cntrl-elec) and 1 W10861510 (console), schdld next appmnt for 6/29 THU !,

Complaint of steam/condensation top rt of C/b inspected unit, door seal good, unit level, ran unit, watched prewash and wash cycle, unable to duplicate, called wptl gauge, said to install a steam blanket Part # w10380479Sr 7718810902Cust stated that rails are sticking again; ordrng 1 W10915185 (RAIL) and 1 W10915186 (RAIL) and 1 w10380479 (shield), schdld next appmnt for 4/19 WED !,