Installed ice maker. Ice maker cycled. Op test ok

Cc: noiseFound noise is ice maker breaking ice from mold. Needs ice maker; ordrng 1 W11556926 (Ice maker)

"Cc unit oven performance, baking results are poorChecked temperatures in both ovens. Ran bake test to 300 degrees in both ovens, let cycle several times and calculated average. Both ovens cycled properly with an average temperature of 302.5 degrees in the upper oven, 304.5 degrees in the lower oven. No issues with temperature found at this time. Unit is working as designed."

"Customer complaint that unit s shaking a lot, found shipping bolts still installed, removed, unit is operating as designed"

"Cc unit not washing dishes well enough and water remains on dishes at end of cycleRan diagnostics, no codes stored. Ran test cycle, ensured hot water coming into unit. Test cycle completed, heater turned on at the end. No faults after cycle. Found customer is not using rinse aid. Advised using rinse aid for better drying performance. Started normal cycle, unit filled and started washing. Let run for 10 minutes, noticed several times the diverter did not complete its switch to the other spray, unit was basically pumping deadheaded. Unit would then drain and restart the fill. Unit will need pump/motor assembly replaced. Customer declined repair at this time, estimate only. ; ordrng 1 W11087376 (Pump/motor assembly)"