WALL OVEN WHIRLPOOL WGE745C0FS00 "Cc not maintaining temperature both upper and lower ovensRan tes bake to 350 degrees, on both upper and lowerAfter 10 min, upper read 385, lower read 380Let cycle for 10 min, upper read 370, lower read 365Ran test bake to 400 on upper and lowerAfter rea

Had cust set both ovens to bake400, checked temps, upper 395, lower 380 let cycle, calibrated lower oven now within 5deg, op test ok; Job Cmpltd

Installed control and sensors, set bake, temp within 5 deg, op test ok; Job Cmpltd,

Installed control, ran recal cycle, op test ok; Job Cmpltd,

Complaint, not spinning out, not finishing cycle, ran diagnostics, pressure system failure tested pressure tube clear, ran recal, drain pump did not turn on, in manual test mode, turned on pump, no power to pump, ohmed pump, 19ohms, good, needs control; ordrng 1 W10916226 (CONTROL), schdld next appmnt for 5/9 TUE !,