Cc found unit not cooling. Compressor is overloading and cutting off. Sealed system repair. Ordering compressor and couplers ; ordrng 1 W11547313 (Compressor) and 2 W11504420 (Coupler)s and 2 W11506622 (Coupler)s and 2 W11506623 (Coupler)s and 2 W11504448 (Coupler)s

"Cc adjusters. Customer had bought her own but they do not fit. Gave customer estimate for adjusters; ordrng 2 WPW10546503 (Adjusters)s, used 1 SHIPPING (SHIPPING LOGISTICS*) from stock"

"Cc unit not making ice. When arriving, comp running, water is circulating.Went through diagnostics. Evap is frost over and Hot gas going through melting the frost and all components are working perfectly diagnostics. At end of diagnostics, bin thermistor error code. Ordering bin thermistor. Customer has water filter to replace as well on return. ; ordrng 1 WPW10511923 (Bin thermistor), used 1 SHIPPING (SHIPPING LOGISTICS*) from stock"

"Cc stopped draining, confirmed cc. Vacuumed out water, put unit into manual test, drain pump did not come on. Tested ohms at the motor 15 ohms. Tested voltage to motor, 0 voltes at motor. Moved up to control board, tested ohms to motor through harness 15 ohms. Tested for voltage from board, board was not sending voltage to motor. Unit would need a new control board. Control board No Longer Available.; ordrng 1 W10051176 (Control N.L.A.)"

"Replaced gasket, seal and float switch. Tested. Good. Op Test Ok.; used 1 SHIPPING (SHIPPING LOGISTICS*) from stock"