"Cc unit not heatingRan test cycle, checked ignitor operation and flame. Found ignitor not powering on, checked power into ignitor, 0v. Checked all thermal. Found inlet thermostat reading open. Bypassed thermostat, ignitor power on, good flame. Quoted customer inlet thermistor replacement. ; ordrng 1 WE04X25201 (Inlet thermostat)"

Customer installed igniter prior to arrival. Installed gas valve. Knob broke. Needs knob. Customer to install; ordrng 1 W11620714 (Knob)

"Cc unit not releasing iceChecked temperature in freezer section. Could not check, unit in a defrost cycle. Unplugged unit and plugged back in, hooked up gauges to check system pressure, low side reading -10 in/ hg vacuum, slightly low on charge. Added 5g of r600a. Low side reading -3 in/hg. Advised customer to monitor."

Installed main control and sensor probe. Ran bake test to 350 degrees. Op test good

"Recovered refrigerant, installed compressor and evaporator. Put unit into 28 inch vac for 15 mins, recharged with 4.9oz of r134a. unit is cooling. advised customer to allow 24 hrs for cooling. op test ok; used 1 W11504445 (5/4 NR MS 00), and 1 Tjaf1200 () from stock"