"Put new UI on, good display is working now. Ran diagnostics, no error codes. Ran a test diagnostics, good, all components working. Ran a manual component spin and agitate. All components sound normal. Good. Looked underneath, good. Op test ok"

"Cc of noise and display not working. Display is blank, unit still works but cannot tell whats going on. Cannot get into component activation in order to see where the noise is coming from. Will replace UI first and further diagnose. ; ordrng 1 W11478523 (Ui)"

DISHWASHER MAYTAG MDB4949SDM0 "Cc unit not getting any water. Found water valve out of range. Had one on truck, replaced tested, good. Customer drain hose was blocked, corrected, good. Unit is working good after testing. Op test ok; used 1 WPW10327249 (VALVE 58.51) from stock"

WASHER AMANA NTW4516FW3 Leaking water into unit without even using it. Replaced valve. Tested. Good. Op test ok

WASHER WHIRLPOOL WET4027HW0 "Cc not doing anything. Drain/Spin light on. Held start button for 7-10 seconds to cancel out, cancelled out. Ran diagnostics mode, no error codes. Ran factory calibration, good. Blew through pressure hose, could tell there was a little pressure trying to