"Cc will not start a cycle, flashes and beepsFound unit displaying fault code f8e4 for overflow. Canceled fault, started cycle. Unit filled and advanced to wash. Checked drip tray under unit. Tray is damp, water was present but has since mostly evaporated. Observed wash cycle for 15 min, no leaks from unit. Unable to duplicate concern at this time. Op test good."

Installed damper control Op test ok

Cx noise coming from rear wall Found noise to be damper control ; ordrng 1 WPW10594329 (control)

"Cc interior switch does not turn light onConfirmed RH door switch is not making contact. Found switch is foamed in place. Called WPL Tech-Line to ensure ok to continue with risk to liner damage. Andrew, ok to continue, use plastic putty knife and break switch apart if needed. Continued to work switch out of foam. Able to remove with very minimal liner scratches. Installed new switch using customer supplied pre id part. Door/lights operation test good."

"F2 e1, f3 e1, f1 e1. Needs new control board. Main control and pressure system fault. Gave client quote for repairs, quote declined. ; ordrng 1 W11124710 (Control), used 1 SHIPPING (SHIPPING LOGISTICS*) from stock"