"Cc that the unit stopped cooling. But freh food section seems to be working ok. Took temps freezer at 56* and fresh food at 57*. Took freezer evaporator cover off and found ice in one spot of freezer at cap tube. Ran diag step 4, no frost pattern on any of the evaporator. Can hear valve changing. Unit will need to get installed a UV drier to fin leak ; ordrng 1 WPW10608485 (Evapo), used 1 WPW10143759 (DRIER) from stock"

Cc of broken panel. Confirmed. Replaced panel. Tested unit. Op test ok

CC that the unit does not agitate and makes a sound when first starting. Ran diag f0e3 Overload F7e6 Motor Circuit. Ran a manual spin and agitate. Started a cycle with towels. Advised Cust half a basket is a full load. No noise when it starts agitating. Opt test ok

"Cc water leaking, confirmed cc water on floor. Found gap in door gasket to frame, after further inspection. Door gasket is fine, door is warped and possibly chassis bent out of true. Up loaded quick pics, ordered door and shims. Office to follow up as door is out of stock.; ordrng 1 LW10646224 (Door) and 2 WP2183852 (Shim)s"

"Cc that the unit is not making ice. Confirmed, took temps freezer at 4* and fresh food section 42*. Ran step 56 no error codes, step 45 no water coming in. Found water liner is frozen. Verify ohns on heater 1.6kohms. Pass, also getting 120v. Cycled ice maker and it filled up with water. Advice cust to monitor but is line keeps freezing will need new control. ; ordrng 1 W10807590 (Control), used 1 SHIPPING (SHIPPING LOGISTICS*) from stock"