"Cc making noise, could not confirm. Customer claims unit is screeching, gave estimate for replacement of rollers, pulley, and belt. Informed them that the service call is good for 30 days.; ordrng 1 4561EL3002A (Idler pulley) and 1 4581EL2002L (Roller kit) and 1 4400EL2001F (Belt), used 1 SHIPPING (SHIPPING LOGISTICS*) from stock"

Replace the panel and tested the buttons and screen. Everything working like normal.

"Vented refrigerant. Installed compressor and filter drier. Pressure checked system with 150psi of nitrogen. No leaks. Pulled vacuum on system to 29 in/hg. Held vacuum. Recharged system with 55g of r600a. Good heat on discharge, low side stable at 7 in/hg. Advised customer to allow unit to run for 24 hrs before restocking. Op test good."

"Trim is stripped and screw cannot be screwed in place. Client would need a new trim piece to fix oven. Oven is 10 years old and she doesnt want to put too much money into it. I jb welded the trim to the screw to hopefully hold it in place but told her that I cannot gurentee itll last. Quoting her for the correct repair. Quote declined. ; ordrng 1 WPW10310922 (Trim), used 1 SHIPPING (SHIPPING LOGISTICS*) from stock"

"Cc unit not cooling, making a buzzing noiseConfirmed unit is reading, 50 and 60 degrees in both sections. Found compressor buzzing for several seconds before overload opens. Compressor is locked, will need replaced. ; ordrng 1 W11557425 (Compressor) and 1 W11109499 (Drier) and 1 W11506635 (Tube extension)"