Installed the new part op tested good.

The unit had lock Code i ran it through a diagnostic cycle it cleared the code unit tested good I ran a calibration cycle and also ran an auto test cycle everything function as designed also ran a normal cycle went through the entire cycle with no issues

The icemaker is overfilling causing water to build up and overflow out of the icemaker needs a icemaker and water valve; ordrng 1 WPW10341329 (Valve) and 1 W10886939 (Ice maker)

The top was squeaking I just did the top the squeaking went away

The user interface is not responding I cannot get the lid too lock and there is a code that prevents the high speeds been due to water temperature needs new controls a lock and a water valve; ordrng 1 W10810403 (Lock) and 1 W11195970 (Control) and 1 W11135391 (Ui) and 1 W11172234 (Valves)