"Cc unit fills with water but does not start cycleRan diagnostics, found code f8e1 for low/no fill. Ran test cycle. All functions passed. Had customer start normal cycle with load. Unit sensed, filled, but only cold water. Hot side of inlet valve is not working. Replaced inlet valve using miscellaneous truck stock part. Restarted cycle, both hot and cold sides are now working. Op test good. ; used 1 W11513255 (Valve) from stock"

"Installed new igniter switches, op test good"

"Installed new evaporator fan motor, op test good"

"Customer complaint of buzzing noise, confirmed, noise is coming from evaporator fan motor, unit needs new fan motor; ordrng 1 WP2315549 (Fan motor)"

"Customer complaint of metallic smell, no burn marks found on controls or anything inside control compartment, customer has brand new cabinets that vent fan is blowing hot air across, advised customer that this will dissipate over time, unit is operating as designed"