"CC that the trim piece of the lid fell off. Confirmed. Replaced the lid. Found the drain hose on the ground. Advised customer there is the drain hose needs to be 39 above the floor. The washer back side is sitting in a lip which is causing the washer to lean foward, where the basket is not centered. Advised customer to have the washer on a level floor to be able to spin correctly."

Cc: freezing on top shelf. Found temps in freezer at 0 ff at 40. Advised on loading. Op test ok

"CC that the washer will not start. Confirmed. Fault code f7e1 is flashing. F7e1 Tachometer missing or Wrong Signal. Replaced the shifter and capacitor. Tested. Opt test ok. ; used 1 W11481722 (actuator), and 1 W11395618 (CAPACITOR) from stock"

Installed mullion rail. Op test good.

"Cc unit will not spin out, does from sense to done Ran Drain and Spin test, lid locked and basket rotated 3 times and then went to done. Actuator optics failed. Quoted customer repair cost. Replaced actuator using truck stock part. Reran Drain and Spin test, all functions passed. Op test good. ; used 1 W11481722 (actuator) from stock"