"Cc unit door handle stuck, door will not closeOpened door panel found handle latch assembly broken. Assembly will need replaced. Quoted repair cost. ; ordrng 1 WPW10130695 (Latch assembly)"

Installed motor and blower wheel. Tested. Advised customer to monitor. Op test ok

"Cc: stops mid cycleCustomer stated once unit gets hot the drum stops tumbling. Stated it seems like the unit is running, but its not tumbling. Found restricted air flow outside. Pulled unit, found unit has good heat and air flow. Found cabinet started to get warm. The restricted air flow could cause the motor to over heat. Needs venting repaired or replaced."

Installed control and ui. Ran test cycle. Advised customer to monitor. Op test ok

Cc: shutting off mid cycleOhmed out moisture sensor. Found moisture sensor is reading properly. Found error code f2e1(stuck key). Ran air fluff to ensure element not shorted. Needs controlCust Has a foil accordian style vent hose attached to dryer. Explained the fire hazard associated with this type of vent hose and advised cust to replace with a semi?rigid metal hose to?prevent fire hazard.; ordrng 1 W11525997 (Control) and 1 W11419056 (Ui)