"Customer complaint that unit fills and does nothing, ran diagnostics found f8e1(long/no fill) error code, found barely any flow through cold valve, found cold valve clogged , unit needs new valve, customer does not want repair; ordrng 1 W11210459 (Valve)"

"Customer complaint that pump keeps running, confirmed, installed new control, ran recalibration cycle, op test good"

Vented refrigerant. Installed compressor and filter drier. Pressure checked system with 150 psi of nitrogen. No leaks found. Pulled vacuum on system to 29 in/hg. Recharged system with 53g of r600a. Low side stable at 1 in/hg. Good heat on discharge. Advised customer to allow unit to run for 24hrs before restocking. Op test good.

"Customer complaint that unit is not cooling, confirmed, compressor is not running, applied 120vac to compressor, compressor did not start, unit needs new compressor and filter drier ; ordrng 1 W11109499 (Drier) and 1 W11504445 (Lokring) and 1 W11504447 (Lokring) and 1 W11557425 (Compressor) and 1 W11504416 (Lokring) and 1 W11504431 (Lokring) and 1 W11506621 (Lokring) and 1 W11506635 (Tube)"

"Cc unit out powering onCustomer states its the washer that needs service, not the dryer, he purchased both at the same time. Corrected information in job, unit under a yr per entitlement. No response from unit. Checked power into ACU, good at 122v. Checked power out from HMI header, good at 12.2vdc. Unit will need HMI console replaced. Part not showing in stock. Office to contact customer with next service date. ; ordrng 1 W11806518 (Panel-UI)"