CC that the u it does not shut off. Confirmed. Found the drain pump running. Held the start in for 10 seconds. Drain pump stopped running. Ran diag F0E5 OFF BALANCE LOAD DETECTED. Ran a calibration. The control W11101488. Started a rinse and spin. Opt test ok.

"Cc not spinning, confirmed cc. Found error code f3e1 and f0e5, cleared codes. Ran diagnostics auto cycle, codes did not return, ran drain and spin. Codes did not return. Unit operating as intended, advised customer to monitor."

"Cc rc not cooling, could not confirm. 3 deg in fc and 36 degs in rc, tested thermistors, tested good. Tested evap fan and damper, tested good. Tested condenser fan and compressor, tested good. Checked frost pattern, pattern good. Unit operating as intended."

"CC that the unit will not drain. Confirmed. Found the wire to the drain pump broken. Found the capacitor leaking. Replaced the capacitor and harness from t/s. Tested. Opt test ok. ; used 1 W11643701 (WIRE HARNESS), and 1 W11395618 (CAPACITOR) from stock"

"Changed cabinet, tested opt test good."