Removed dryer from washer unit. Installed main control. Ran speed wash cycle with clothing load. Unit advanced through cycle properly and finished. Op test good.

"Cc unit not coolingUnit is plugged in and compressor is running, both sections at room temperature. No heat on discharge, no frost pattern on evaporator. Unit has no refrigerant left in the system, will need sealed system repair. Quoted customer sealed system cost. Customer declined repair."

"Cc unit not completing cyclesCustomer states the unit will stay at a set cycle time and just tumble and add water but not advance. Ran diagnostics load tests, all functions passed. Started speed wash cycle with no load. Unit completed cycle. Started speed wash with clothing load. Unit is stuck at 5 min, continually trying to rebalance, but load looks balanced and no excessive tub vibration when starting to spin. Quoted customer main control replacement. Customer declined repair at this time; ordrng 1 EBR86771812 (PCB assembly)"

"Cc: not filing, not spinningRan quick wash. Found no cold water coming in. Found no cold water from house. Unit fills with hot water. Ran drain and spin. Unit draining and spinning. Need plumber"

"Customer complaint that unit is not spinning, confirmed, found belt snapped, unit needs new belt, installed new belt from truck stop surplus, op test good ; ordrng 1 WP21352320 (Belt)"