Re-diagnosed unit. Found burnt black wire L2 on terminal block. Connection to terminal block was loose. Power cord in good condition. Replaced terminal block and repaired wiring using truck stock harness kit. Ran bake test to 350 degrees. Good preheat and operation. ; used 1 W11416047 (TERM BLOCK KIT - RANGE) from stock

"CC that the unit was beeping and now not working. Confirmed. Control is not responding. Will need a new control. ; ordrng 1 W11314393 (Control), used 1 SHIPPING (shipping and handling) from stock"

"Cc: not heating to temp, not holding tempRan test bake. Found average temp at 360 degrees. Unit functioning as designed. Op test ok"

"Cc unit leakingFound ice buildup on bottom of freezer section, evaporator drain tray iced over. Cleared ice from freezer and drain. Pulled drain tube from rear and flushed. Ensured good flow through. Op test good."

"Cc unit not spinning out Cust stated that a lot of times, unit will not advance to drain and spin cycle. She will have to manually set it for a drain and spin cycle. Ran diagnostics, found codes f8e1 for long fill. Found hot water turned off to unit. Turned on and ran auto test, all functions passed. Ran quick wash cycle in entirety. All functions passed, unit spins and drains properly. Unit was faulting out on low water level during cycle since customer was using wash temperatures set to hot. Op test good."