Fred's Appliance Service Rated 4.8 out of 5 stars based on 600 customer reviews

We serviced a
WHIRLPOOL WASHER
Model WFW8740DW0
Near Geneva, OH 44041
Joe O
Job Details: 05/09/2022
"Found error codes f3e1(pressure system fault) f6e3(communication error) f8e3(over flow conditions) f5e2(door lock error). Ran quick wash to test pressure switch. Unit filled to normal level. Found excessive suds in unit. Found harness checks good between control and ui. Found drain hose too far into stand pipe. Advised customer of siphoning, and drain hose. Needs control and pressure switchCustomer does not want to repair at this time. ordrng 1 W11029840 (cntrl-elec)"
We serviced a
WHIRLPOOL REFRIGERATOR
Model WRT311FZDB00
Near Mentor, OH 44060
Joe O
Job Details: 05/09/2022
"Cc: not cooling properlyFound temps in ff section at 49 degrees, freezer at 39 degrees. Found unit has ball of ice on cap tube. Needs compressor and evaporatorCustomer does not want to repair at this time ; ordrng 1 WPW10507886 (compressor) and 1 W10836706 (evaporator), used 1 SHIPPING (shipping and handling) from stock"
We serviced a
MAYTAG REFRIGERATOR
Model MFF2558VEB1
Near Mentor, OH 44060
Joe O
Job Details: 05/09/2022
"Cc: not coolingFound temps in both compartments at 61 degrees. Compressor not running. Condenser fan running. Tripping overload. Unplugged unit for 15 mins. Plugged unit back in. Found unit pulling .7 amps. Over working compressor. Needs compressor and evaporator Customer does not want to repair at this time; ordrng 1 W10233960 (compressor) and 1 12002041 (kit,evap), used 1 SHIPPING (shipping and handling) from stock"
We serviced a
WHIRLPOOL RANGE
Model WGG745S0FS02
Near Mentor, OH 44060
Joe O
Job Details: 05/09/2022
"Found burner head that came was incorrect. Tested unit with burner cap alone, still bigger flame on one side. Re ordering burner head. ; ordrng 1 WPW10406797 (burnr-head)"
We serviced a
MAYTAG WASHER
Model MVWC465HW3
Near Wickliffe, OH 44092
Joe O
Job Details: 05/09/2022
"Cc: residue on dark clothesFound no stored error codes. Ran auto test. Unit functioning as designed in diagnostics. Ran normal cycle. Found unit filling and agitator. Called whirlpool tech line spoke with Anthony. He stated if unit filling washing draining and spinning properly its going to come down to detergent usage, load size p, water temps and ensuring to run clean washer cycle frequently. Advised customer to run clean washer cycle, try different water temps, and if unit still leaving residue to contact whirlpool customer service. Unit functioning as designed. Op test okSr"
Cleveland, Ohio
05/09/2022
Joe was great! He fixed my dryer on the spot.
Overall Experience
Mentor, Ohio
05/05/2022
Prompt & professional. Definitely will use in the future, even if outside of warranty in my appliances.
Overall Experience
Eastlake, Ohio
05/03/2022
Friendly and did his job,very satisfied
Overall Experience
Joan priola
Chesterland, Ohio
05/02/2022
I was very satisfied with everything
Overall Experience
Joe
South Euclid, Ohio
05/01/2022
Very professional very smooth Service
Overall Experience